Fleming 60

Full standard build specification version #2

Version #2 (WEF 60-001)
Fleming 60 - Pilothouse Motor Yacht

SPECIFICATIONS
General Description
LOA (hull): 62’ 9” (19.1m)
LOA (including swim step
and anchor platform): 66’ 11” (20.4m)
LWL 56’ 9” (17.3m)
Beam: 17’ 6” (5.33m)
Draft: 5’ (1.52m)
Air draft (to top of radar arch): 17’ (5.18m)
Displacements
Minimum Operating Condition: 88,000 Lbs. (40,000kg)
Loaded Condition: 105,600 Lbs. (48,000kg)
Main Engines: Twin MAN i6-800 (800 HP @ 2300 RPM)
Transmission: Twin Disc MGX-5126A shift and troll valves
Reduction Ratio: TD 2.50:1
Engine Controls: Glendinning EEC3 (with back-up system)
Shaft System Seatorque M4 Bolt on shaft system
Generator: 17Kw, 60Hz Onan eQD
(European model 13.5Kw, 50Hz)
Stabilizers: ABT TRAC 7.5 Sq. Ft fins with winglets
250 model actuators
Bow Thruster: SE250 15.5 HP (11.4 Kw)
Fuel Tanks: 1,450 USG (5,488 Liters) in two tanks
Water Tanks: 300 USG (1,135 Liters) in two tanks
Black Water Tank: 165 USG (625 Liters)
Monitoring System: Fleming First Mate (FFM) / Boning

SPECIFICATIONS BY AREA OR GROUP
HULL
Solid laminate, commensurate for hull size, made in female mold.
Black Gel coated boot stripe
Vinylester resin used for outer laminations
Full-length stringers and athwartships frames laminated over foam
Simulated planking grooves
Gel coated finish above waterline
Five coats of epoxy barrier coat below waterline
Two coats of Black Pettit 1088 GA antifouling paint
Pettit Metal Etch Primer 6455/044 and Pettit Epoxy Primer 4700 and Pettit 1088GL Trinidad Antifoul used on underwater metals
Integrally molded guard with stainless steel rub strip
Keel extends below running gear
Keel space filled and sealed across top
FRP rudders with Aqualloy 22 Hi-strength stocks
CE-approved stainless steel portlights
Stainless steel keel shoe – 8 ft long (2.4m)
Recessed I-struts in shaft pockets
Fin cutters in front of stabilizer fins

DECK AND SUPERSTRUCTURE CONSTRUCTION
All parts made from molds.
Corecell Cored construction
Cook gel coat “Fleming White”
Vinylester resin used for outer laminations
EXTERIOR
Stainless steel trim around roofs, on forward teak cap rail, and guard
Italian made exterior locks
Hella LED navigation and anchor lights in accordance with relevant regulations
Fixed transom wedge trim tab
Stainless steel Fleming & “F” Logo on port & stbd forward roof supports
Quickutter line cutters
Exterior seating with EZ-Dri foam, Sunbrella upholstery, and mesh backs for drainage
Groco serviceable exterior sea strainers

AFT DECK AREA
Covered, raised California deck with teak decking, molded seating, fixed satin varnished teak table with stainless-steel pedestal legs.
Cockpit with flush lazarette hatch with hinge, gaskets, locks & gutters with drains
Inward opening transom gate stbd side
FRP Swim step with duckboard, molded white non-skid surface. Stainless steel rub rail
Storage locker in step on swim step
Stainless steel telescopic swim ladder - can be deployed by swimmer
Wide teak coaming around cockpit
FRP skirt inboard of teak cap.
Engine-room air intakes behind skirt and inside bulwarks
Stainless steel ladder to flybridge with teak treads
Sliding doors to salon - FRP with glass windows & weather strips
Seadog style latches for doors
Hot & cold shower fittings recessed on transom, with quick release shower head and flexi hose
Saltwater 316 Stainless steel faucet
Fresh Water 316 Stainless steel faucet
Smartplug Shorepower inlet 220v, 50A, (European model 230v, 32A)
Overhead LED lights on dimmer (3)
LED rope lighting under coaming skirt.
Chocks at hull sides and transom.
Deck scuppers piped out at boot stripe
Flush hatch with stainless steel safety rail and steps down into engine room
316 grade stainless steel handrail across transom
Stainless steel chocks and two heavy duty cleats, on port and stbd sides
Stainless steel chocks and heavy-duty cleats on transom, port and stbd sides

SIDE-DECKS
Teak decking
316 grade stainless steel handrails along house-side
Teak rail cap on bulwarks
Bulwark doors opening inboard with barrel bolts
Non-skid on top side of guard at boarding gates
Stainless steel overhead LED lights. Two per side.
Courtesy LED “F” logo lights at steps up to Portuguese deck
Stainless steel handrails at side deck steps
Stainless-steel grab rails over side deck bulwark gates port & stbd
Steps to Portuguese Bridge deck with teak treads
House side fixed windows with tinted, tempered glass and FRP frames
Galley window sliding with tinted, tempered glass and FRP frame
Three Hereschoff style stainless steel cleats/chocks per side recessed into bulwarks
Fuel fill fittings for both fuel tanks in recessed boxes on Port & Stbd house side
Two Stainless steel chocks and four heavy duty cleats on port and stbd sides

PILOT-HOUSE DECK LEVEL
Portuguese Bridge
Teak rail cap
Locker doors in aft face of Portuguese bridge, access to large vented storage with Dri-Deck flooring
316 grade stainless steel handrail around forward side of pilothouse
316 grade stainless steel handrails at side of pilothouse Port & Stbd
Sliding aluminum pilothouse doors port & stbd with weather seals in stainless steel channels
Teak decks
Hinged doors through Portuguese bridge to foredeck – port & stbd
Individual screen wash and heavy duty self-parking wipers on windshield
Clear, tempered 8mm glass, in forward facing windshields Pilothouse windows are fixed and have FRP frames
Inward opening doors on Portuguese Bridge side decks port & starboard
Stainless steel Fleming “F” logo’s on forward roof supports port & starboard
Black water tank suck-out deck fittings on port and stbd sides
Two stainless steel fender tie fittings on port and stbd sides
Galley cooktop and microwave vent

FOREPEAK
Chain locker
Divider for port & stbd anchor chains
Watertight collision bulkhead
Forepeak drains directly overboard.
Bitter end fittings
Hatch scuppers
High gloss poly paint finish
Overhead LED light
Forward Shorepower circuit breaker
Dri-Deck flooring
Hinged sole boards
FWD DECK
Beige color non-skid deck
Cabin trunk with white non-skid finish. Drained and vented storage lockers. Hatch lids with gaskets
CE approved stainless steel hatch/skylight for forward cabin
Teak rail cap on bulwarks increasing in width going fwd
Stainless steel stanchions to support stainless steel handrail
Stainless steel oval handrail
Deep deck lockers either side of anchor platform with white non-skid finish on lids
FRP anchor platform with molded white non-skid finish and two sets of rollers
Two 24v DC Maxwell RC12, windlasses with pendant control, and control panels at both stations (P/H & F/B)
300ft (91m) length of 7/16” (12mm) Stainless-steel Grade 60 German chain
100Lbs (45kg) Stainless steel Ultra Anchor with stainless steel Ultra swivel
Ultra chain hook with strop (for securing anchor when stowed)
Two stainless steel chocks and four heavy duty cleats on port and stbd sides
316 grade stainless steel pulpit. Welds ground and polished.
Foredeck LED “F” Logo courtesy lights at deck level
Hatch to forepeak
Smartplug Shorepower inlet for 220v, 60Hz, 50A, (European model 230v, 50 Hz, 32A)
Socket for Plug-in windlass control
Saltwater 316 stainless steel faucet inside foredeck lockers
Fresh water 316 stainless steel faucet inside foredeck lockers
Deck drains plumbed to boot-stripe to prevent black streaks
FRP forepeak vent
Teak burgee pole

FLYBRIDGE
Lexan venturi with stainless steel rail & stainless steel base track
Steering console with engine and thruster controls
Stidd double helm seat with folding footrests, adjustable fore/aft position
Electronics console with black Formica panel
15” color touchscreen for FFM monitoring system including MAN engine instrumentation
Ritchie Compass with light & dimmer
Hypro Electro/Hydraulic steering with destroyer-type stainless steel steering wheel
Fire system repeater alarm
Flybridge cushions on settees and helmseat using EZ-dri foam with Sunbrella upholstery and mesh backs for drainage
Perfix snaps for attaching cushions
L-Settee stbd side with high seat backs
Beige color non-skid deck
Satin teak table with Hi-lo and sliding stainless steel pedestal on stbd side
Straight settee port side with high seat backs
Hella LED navigation lights in accordance with relevant regulations
Kahlenberg D-330 Air horn with twin trumpets, P449-25 Compressor/reservoir, V-149K 24v Solenoid valve
Two Mastervolt 20-amp 24v to 12v DC-DC converters with 12v battery back-up system.
FRP Radar arch with LED overhead lights
Stainless steel railings with mid safety rail
Stainless Steel safety gate between flybridge and boat deck
Dri-Deck flooring in storage areas and under seating
ABT TRAC-LINK color touchscreen control panel for stabilizers
Stainless steel safety rail by sliding hatch
Low level courtesy LED lights with “F” logo

BOAT DECK
Extends aft to cover raised CA deck below
Integrally molded beige non-skid on deck
Integrated deck drains with gutter system
316 grade stainless steel handrails.
Removable mid-rail on port side for liferaft deployment
1,000 lb capacity Steelhead ES 1000 davit with powered telescopic boom, luffing, hoisting and rotation, with radio remote control
Hinged hatch to cockpit ladder
GFCI 110v AC outlet (European model 230v AC, outlet RCD protected)
Fresh Water faucet (316 Stainless steel)
Stainless steel saddles for tender cradle (supplied loose)
Aluminum plate inside deck for tender tie down at bow
Pre-wiring for aft facing 24v DC LED flood lights, aft end of boat deck Port & Stbd
Cabinet aft of port settee for storage or installation of optional appliances (BBQ, Fridge or Freezer)
Stainless steel flagpole holder on aft flybridge rail
Teak flagpole with internal stainless-steel reinforcement

LAZARETTE & CREW CABIN
Steering gear
Hypro Marine hydraulic power pack with primary, back-up, and autopilot steering pumps, on anti-vibration mounts with FRP drip tray
Deck and hatch scuppers
Hull finished with gloss white polyurethane paint
LED Overhead lights
300 gal (1,135 liters) Fresh Water tanks. 2 pcs polyethylene tanks located underneath berth to port and under machinery platform to stbd.
Single crew berth to port with storage locker
Self-Contained Air-conditioning for crew cabin
Enclosed Crew Head, shower and sink in central compartment with ladder to cockpit hatch access
Access door to engine room with portlight
Dedicated machinery space to stbd with:
Aft shorepower inlet circuit breaker
Smoke Detector
Two Isolation transformers for shorepower
Automatic AC controller
Dual 24v DC Gianneschi Fresh water pumps, pressure regulator, and flow sensor
Fresh water system (debris) filter
Fresh water tanks drain valve, with protective cover
Fresh water tanks isolation valves
Submersible bilge pump
High bilge alarm
Arctic steel strainer for watermaker

ENGINE-ROOM
Stainless Steel overhead handrails
Bow thruster Main Switch panel and fuse
Seatorque M4 BOSS (Bolt on shaft system) - an enclosed, oil lubricated, self-contained shaft and thrust bearing assembly.
Hinged covers over Seatorque cardan shaft and universal joints
Fire retardant FRP fuel tanks (2).
Solenoid operated sight gages on fuel tanks
Equipment platforms
Anti-vibration soft mounts for double mounted genset
220v, 17Kw, 60Hz (European model 230v, 13.5Kw, 50 Hz) Onan eQD genset with sound shield and combined muffler/water separator for exhaust
NIM module for genset – allows genset data to be displayed on FFM Monitoring System
Groco seacocks for main engine seawater inlets
Arctic Steel raw water strainers for engines, gensets, aircon, and all seawater intakes
Main engine exhaust system with exhaust chambers and by-pass on transom
Engine room heat extraction blowers (2)
Heavy duty sound insulation covered with perforated aluminum
Engine access hatches locked down on gaskets
Fire suppression system with automatic engines/genset/blowers’ shutdown
Automatically closing fire dampers on air inlets and discharge vents
Heat detectors (3)
Smoke Detector
Bilges painted with gloss white polyurethane paint
Sole board covered with Lonseal vinyl.
Sole lifters stainless steel
Fresh water coiled hose
Submersible bilge pump
Sump pump
High bilge level alarm
Start/stop buttons for both engines
Lube oil pumps (2) for engines, transmissions and generator
DC LED lighting
110v GFCI electrical outlets (European model 230v AC, outlet RCD protected)
Kahlenberg Horn Compressor
600 A/H house battery bank - 8 pcs Lifeline GPL- 6CT AGM (6 volt) batteries
Automatically controlled battery box fan
255 A/H port engine/genset starting battery bank – 2 pcs Lifeline GBL-8DL
255 A/H stbd engine/genset starting battery bank - 2 pcs Lifeline GBL-8DL
Drip pans underneath main engines
Lead foam sound insulation
Starboard platforms and sole boards
Airtight FRP door with dog down latch and viewing port
Air-conditioning compressors
Gianneschi 24v DC high capacity sea water pump
Balmar MC-624 alternator regulator with house battery bank temperature sensor
Two 24v Mastervolt 15-amp battery chargers, one for each engine/genset battery bank.

INTERIOR
Accommodation choices:
Standard Accommodation layout “A” - Three staterooms, two heads with central passageway, Washer & Dryer to stbd, stbd cabin with up/over berths, port cabin twin (or queen) and master cabin forward with queen berth. Access is from salon. (Dayhead is optional with this layout)
Or
Optional Accommodation layout “B” - Three staterooms, two heads with full beam master cabin midships, port cabin with upper & lower berths, washer & dryer access from lobby, and forward cabin with queen berth (or Vee-Berths). Access to accommodation is from the Pilothouse. Layout “B” also includes Dayhead in the Pilothouse.
Accommodation with three staterooms
Hanging lockers lined with teak
Insect screens for all opening windows, portlights and skylights
Mobella interior door locks
Cruisair reverse cycle air-conditioning with remote compressors and Qht controls
All cabins pre-wired for intercom/phone system
LED mood rope lighting behind valances, stairs and settees
LED overhead lighting throughout
Teak joinery with satin varnish hand-rubbed finish throughout
Teak and holly sole throughout – hand-laid solid timber (not plywood)
Light fixtures to have polished stainless steel finish
Interior locker door handles with polished stainless steel finish
Interior bulkheads feature sandwich construction with lead foam sound insulation
Headroom 6’ 6 ½” (2.0m) minimum throughout
Synthetic leather headliner - grey
Interior bulkheads lower half teak, upper half Synthetic leather - grey
AC outlets and light switches to be Vimar brand with graphite grey faceplates
All drawers constructed with dovetail joints
Cabin & Head doors with gaskets

SALON
Fixed windows in house sides
Opening window in galley with removable insect screen
Sliding doors at aft end
Spring loaded barrel bolts to allow phantom screen installation
Medium grey tinted, tempered, glass.
Wood window blinds with teak retainers
Pre-wired for intercom/phone system
Teak valance over windows with LED rope lighting
Overhead LED light fixtures on dimmers
Access hatches to allow for engine removal
Synthetic leather headliner - grey
CO detector
Upholstered L-Settee
Fleming Hi-Lo oval table with teak top
FRP sandwich with honeycomb composite sole
Air-conditioning
Aft bar cabinet with icemaker
Sconce lights with shade
Entertainment center, teak cabinetry & lockers full length from galley refer to aft bulkhead, with powered TV lift
Vertical handrails at top of stairs to accommodation

GALLEY
Granite (or Corian) countertops
Undermount stainless-steel double sink
Insinkerator waste disposal
Stainless steel convection microwave oven with cooktop overboard vent
Three burner Miele flush mount induction cooktop
Removable stainless steel potholders for cooktop
20.5 cu ft side by side refrigerator/freezer
Swivel faucet with removable spray head
Overhead LED lighting
Slide out trash bins
Four Drawers with guides and stops
Overhead Cabinets
Air-conditioning
Duplex 110v AC GFCI outlets (European model 230v AC, outlet RCD protected)
Granite splash back installed behind sink and cooktop
Preparation for optional dishwasher – including AC power cables, circuit breaker, and fresh water feed with shut-off valve
Full height slide-out pantry stbd side
Slide-out storage drawer above cooktop
Teak slide-out deep storage drawers on aft arm of galley counter
Swing-out “Magic” corner storage unit in outboard corner
Storage cabinet under sink with automatic LED lighting

PILOTHOUSE
One Stidd 500XL low back helm seat with chrome package, footrest, drink holder, and black Ultraleather upholstery
FFM Monitoring System remote control unit mounted in stbd arm of Stidd seat
Chart table with double-guide drawers and stops
Chart light on flexible arm
Dismountable control console with space for owner supplied electronics
Fleming First Mate (FFM) Monitoring System 15” color display screen on lower console – See systems for detailed description
Dedicated space for Autopilot control
ABT TRAC-LINK color touchscreen control panel for stabilizers
Horn control
Air reservoir for air horn
Electronic engine controls Glendinning EEC 3 with synchronizer and troll
Back-up electronic engine controls (gear and throttle)
Hypro electro-hydraulic steering system with Destroyer type steering wheel
Back-up Steering control panel with back-up rudder angle indicator
Ritchie Compass with light & dimmer (specify required hemisphere)
Overhead electronics console
Wiring routes to facilitate equipment installation
Overhead LED lighting with dimmer
LED red and white dimmable bridge lights in upper console
Stairs down to salon, up to flybridge
Back lit electrical & Battery Master Switch panel
Advisory panel
Doors on electrical and advisory panels
L-shaped settee on raised area
Wooden window blinds on port & stbd windows (3) with teak retainers
Teak table with single stainless steel leg and swivel
File drawer
Self-parking, heavy-duty wipers with multi-speed/intermittent controls & individual freshwater wash on forward-facing windows
Windshield glass, clear, tempered, 8 mm thick
Variable speed demister blower on forward facing windows
Control for bow thruster
Hinged access panel to underside of flybridge console
Air-conditioning
Black water tank level indication and pump control on FFM System with auto pump shut-off when tank empty, and auto head shut-off when tank full
Generator start/stop & digital control panel
Windlass up/down switches & control circuit breaker
Fire system and high-level bilge alarms
Bilge pump control switches on advisory panel
Pre-wired for intercom/phone system
Sconce lights with shade
In-Fill cushion for pilothouse berth
Smoke Detector inside pilothouse console
“Charcoal” suede fabric on upper surface of consoles

ACCOMMODATION
PASSAGE
Lower part of bulkhead finished with teak, upper part finished with synthetic leather, teak chair-rail trim at join
Access doors to staterooms (option A)
LED Rope lights at stairs to accommodation
Overhead LED lighting
Manual bilge pump under steps
Bosch washer and Bosch drier in cabinet with louvered door

FORWARD STATEROOM
CE approved stainless steel hatch with powered Oceanair sliding insect and black-out screens
Tapered queen-sized bed with electric lift and manual slide
Retainer device for sliding bed securing knob
Upholstered Headboard
Foam mattress
Teak lockers either side of bed
LED Rope lighting under bed and steps
Two hanging lockers. Teak faced with louvered doors. Automatic interior lights
TV space on bulkhead
Drawers with center guides and stops
Beveled-edge mirrors
Door stops and holders.
Doors with teak frame with flat teak panels.
Bulkheads with teak to waist height with synthetic leather above
LED overhead lighting
Berth LED reading lights
CO detector
Smoke Detector
Drapes
Emergency Escape telescopic ladder stored in port hanging locker
Cruisair Air-conditioning
FFM 4.3” touchscreen panel with CCTV control

GUEST HEADS
CE-approved Portlight with removable insect screen
FRP shower stall with granite sole & seat and lockers
Stainless steel framed glass custom shower doors
Shower mixer, pressure and temperature compensated
Stainless steel toiletries rack inside shower locker
Marble or granite counter top with porcelain basin
Hans-Grohe Faucets
Beveled-edge European sourced mirrors
LED overhead lighting
110v AC GFCI outlet (European model 230v AC, outlet RCD protected)
Tecma toilet
Ventilator fan
Stainless steel towel rails
Drapes
Air-Conditioning inlet from cabin
Lifting mirror above basin
Trident Premium Sanitation hose
Holding tank full indicator

PORT STATEROOM
Stainless steel CE-approved portlights with removable insect screens
Twin berths, upper berth slides outboard when not in use
LED rope lights under berths
Full height beveled-edge mirror
Hanging locker with auto light and louvered door
Valance over portlights
Foam mattresses
110v AC outlets (European model 230v AC)
Upholstered Headboards
LED overhead lighting
Bookshelves
CO detector
Smoke Detector
Drapes
Berth LED reading lights
LED Rope lighting and drape tracks at portlight openings.
Cruisair Air-conditioning

AFT MASTER CABIN 
Stainless steel CE-approved portlights with removable insect screens
Large island berth
Hanging locker with auto-light.
Nightstand with drawers
110v AC outlet (European model 230v AC)
Foam mattresses
LED overhead lighting
Berth LED reading lights
LED Rope lighting and drape tracks at portlight openings.
CO detector
Smoke Detector
Drapes
Cruisair Air-conditioning

MASTER CABIN ENSUITE
CE-approved Portlight with removable insect screen
FRP-lined shower stall with granite sole
Stainless steel framed glass custom shower doors
Lockers
Shower mixer pressure and temperature compensated
Marble or granite counter top with porcelain undermount basin
Hans-Grohe Faucet
Beveled-edge European sourced mirrors
LED overhead lighting
110v AC GFCI outlet (European model 230v AC, outlet RCD protected)
Stainless steel towel rails.
Tecma toilet, white color.
Ventilator fan
Drapes
Air-Conditioning inlet from cabin
Trident Premium Sanitation hose
Holding tank full indicator

SYSTEMS
STEERING
Hypro Marine ECS Electronic Steering with electronic helm units at Pilothouse and Flybridge.
Hydraulic Power-pack with on-demand variable speed primary pump, 24v DC reversing back-up pump, and pre-plumbed 24v Autopilot pump in lazarette
Shielded power supply cables
Rudder angle indicators at pilothouse and flybridge station on FFM Monitoring System
Back-up steering control panel with dedicated rudder angle indicator in pilothouse.
Separate power supply and control for backup steering
Destroyer wheel at flybridge and in pilothouse
Pilothouse steering wheel has teak grips
FRP rudders with Aqualoy 22 stocks
Rudder tubes extend above waterline

ENGINE CONTROLS
Glendinning EEC 3 electronic engine controls with troll, and synchronizer at pilothouse and flybridge.
Back up engine controls system in pilothouse (gear and throttle)

MACHINERY
Twin MAN i6-800 HP Common Rail Engines
Twin Disc Marine transmissions with electric shift and troll valves
Stabilizers - ABT TRAC 7.5 Sq. Ft fins with winglets and 250 model actuators, hydraulically operated locking pins, hydraulically driven sea water cooling pump, and two, color touchscreen control panels (P/H & F/B)
Sidepower SE250 15.5 HP (11.4 Kw) bow thruster with Sidepower Main Switch unit and jog lever controls at each station
4-blade (NSP) Nickel Aluminum bronze propellers
Recessed I-struts in shaft pockets
Rubber Design adjustable soft engine mounts
Underwater exhaust and internal water-lock muffler system
Seatorque M4 BOSS (Bolt on Shaft System)
Fleming First Mate (FFM) central monitoring system with Boning 15” color touch-screens in Pilothouse and Flybridge – see Systems for full description

FUEL SYSTEM
Fuel filters. Racor 75/1000MAX Duplex with vacuum gauges for main engines
MAN Primary fuel filters with water-in-fuel sensors for main engines
Racor 500MA fuel filter for generator
Two FRP fuel tanks made of vinylester and fire-retardant resins and with a fireproof exterior coating
Total fuel capacity 1,450 USG (5,489 Liters)
Sight glasses on both fuel tanks with solenoid operated (push button) safety valves
Fuel tank sumps and drains with shut-off valves on all tanks
Fuel management panel for engine/genset supply return selection
Remote emergency fuel shut-off device for both tanks
Electric fuel priming pumps for both main engines
Pressure type fuel tank level sensors connected to FFM System

PLUMBING
SANITARY
Tecma toilets, white color.
Toilets flush to FRP holding tank with level indicator
Toilet flushing with Seawater or Freshwater.
Anti-odor filters on holding tank vents Port & Starboard
165 USG (625 Liters) Black water tank
Tank level indicator and pump control on FFM Monitoring System
Plastic lined pressure accumulator tank
Black water tank suction deck fittings port and stbd side
Black water tank seawater flushing system, with self closing safety valve
Gianneschi heavy duty 24v black water discharge pump
Sealand T24 backup black water discharge pump
Black water discharge seacocks with position indication – prevents discharge pumps running if valves are closed

FRESH WATER SYSTEM
320 USG (1,211 Liters) total in two polyethylene tanks, with drain and isolation valves.
Sight glasses on water tanks
Dual 24v DC Gianneschi Fresh water pumps, inlet filter & flow sensor
20 USG (75 Liters) Torrid water heater with 220v AC heating element and heat exchanger coil, drain & pressure release valves.
Heat exchanger system and circulation pump for heating domestic water from port main engine via heat exchanger, circulation pump runs automatically when engine is running
Fresh Water 316 Stainless-steel faucet on foredeck, flybridge and cockpit Fresh
Hans-Grohe interior faucets
Whale brand plumbing
Fresh water coil hose in engine room
Pressure type level sensor connected to FFM monitoring system
Thermal expansion tank

GREY WATER SYSTEM
Head basins and showers drain into two Johnson grey water sump/pump collector boxes and automatically discharge overboard

SEA WATER SYSTEM
Gianneschi 24v DC seawater pump and strainer
Saltwater 316 Stainless-steel faucet on foredeck, and cockpit
Sea water flush line connected to black water tank, with self closing safety valve
Whale brand plumbing
Arctic steel intake strainers for main engines, generator and sea water system
Sea water pump auto shut-off safety function

BILGE SYSTEM
3 pcs 3,700 GPH Rule electric bilge pumps with auto/man control
Manual bilge pump for engine room bilge compartment
High level bilge alarm switches in lazarette, engine room, and forward bilge using USS type bilge pump/high level alarm float switches (3) connected to FFM Monitoring System
Bilge counter on FFM Monitoring System records number of times bilge pump runs
Forward bilge sump pump – Whale Gulper
Engine room bilge sump pump – Whale Gulper

ELECTRICAL
ELECTRICAL – AC
220v, 17Kw, 60Hz Onan eQD generator, single phase, in sound shield, double mounted on anti-vibration soft mounts, with NIM module (European model 230v, 13.5Kw, 50Hz)
Remote distribution panels.
Dedicated inverter compliant AC panel
Remote controlled and monitored circuit breakers
Digital meters (volts, amps, watts and frequency) and circuit breakers as required
Two 220v, 50 amp shore inlets one forward and one aft connected so as both can be used simultaneously (European model has two 230v, 50Hz, 32A inlets)
Two Isolation & voltage boosting transformers for shorepower
Automatic AC Controller for shorepower/genset
AC outlets throughout boat. GFCI type in heads, galley, engine room and exterior
Vimar AC outlets with Graphite Grey Silk Faceplates
3,500 watts, 110v 60Hz pure sine wave Outback inverter (European model is 3000 watts, 230v 50 Hz)
Inverter bypass system
Inverter remote control panel in pilothouse.
Approved Marine Grade Tinned copper wire
Hinged panels for serviceability

ELECTRICAL – DC
Main ships system 24v DC.
Three isolated 24v battery banks– all batteries are Lifeline AGM type
600 Ah house battery bank - 8 pcs Lifeline GPL-6CT AGM (6 volt) batteries
Automatically controlled battery box fan
255 A/H port engine/genset starting battery bank – Two Lifeline GPL-8DL
255 A/H stbd engine/genset starting battery bank– Two Lifeline GPL-8DL
105 Ah 12v Backup battery – Lifeline GPL-31T
12v DC provided via two 24v-12v DC-DC, 20 amp, converters & back-up battery system located on flybridge
Remote controlled Battery master switches operable from Pilothouse, also allows paralleling of battery banks
Two 24v Mastervolt 15-amp battery chargers, one for each engine/genset battery bank.
Engine/genset battery banks also charged by MAN engines original alternators
DC load distribution panels with remote circuit breakers, sub panels as required
Outback Flexnet DC House Battery Bank Monitor shows voltage, state of charge and current flow in & out of house battery bank – info displayed on Mate remote panel in pilothouse and on central monitoring system
Two Delstar 200 amp, 24v heavy duty, brushless, auxiliary alternators with Balmar MC-624 external regulator, and battery temperature sensor
Approved Marine Grade Tinned copper wire
Hinged panel for serviceability
Vimar light switches with Graphite Grey Faceplates
LED lighting and dimmers

ELECTRICAL – BONDING
Copper strap and buss bars or cable connecting all thru-hulls, underwater fittings, pulpit and flybridge rails – (equipotential bonding system)
Zincs on transom (2)
Copper strapping system in engine room, flybridge and pilothouse for SSB radio counterpoise

FLEMING FIRST MATE - MONITORING SYSTEM (FFM)
15” color touchscreen located in Pilothouse
15” color touchscreen located on Flybridge
4.3” color touchscreen repeater located in Master Cabin
Home page with “Ready for Sea checklist”
Digital switching of AC & DC loads, with feedback and status monitoring
SMS remote alarm system sends text messages. (requires SIM card)
Remote control panel located in Stidd seat arm rest
Optional iPad remote access
System monitors/displays the following parameters:
All MAN (or Cummins) engine data and alarms - analog, digital and graphic view
Navigation lights (monitoring and control) with back-up control panel
Bilge pumps & counter
Sump pumps
High bilge level alarms
Fire system – Cylinder pressure
Heat detectors
Smoke detectors
Black water tank level and control of discharge pump
Status of black water discharge seacocks
Fuel Tank levels using pressure type sensors
Water tanks level using pressure type sensor
Port and Stbd engine room air intake shutters
Port and Stbd Seatorque shaft oil temperature
Engine room, sea water & exterior ambient air temperature
Fresh water system pressure
Fresh water system flow
Seawater system pressure
Seawater system flow
Engine room blowers
Engine room door
Lazarette hatch
Cablemaster (in/out)
Passarelle (in/out)
Engine room lights
Steering pump
Back-up steering pump
Engine controls
Watermaker (if installed)
Main engines seawater flow sensing
Hydraulic cooling seawater flow sensing (if installed)
Genset engine data
Wind speed & direction
GPS (SOG, COG & Position)
Range
DC voltage (24v and 12v battery banks)
Fwd & aft Shorepower voltage, frequency and current draw
Inverter voltage, frequency and current draw
Genset/s voltage, frequency and current draw
Genset/s remote start/stop
SMS messaging

MISCELLANEOUS OUTFIT
eFIT – (Electronic Fleming Information Tablet) all technical documentation is supplied on an Apple iPad including, a comprehensive Owner’s Manual with system descriptions, schematics, wiring diagrams, product manuals and equipment list. An iPad storage slot and charging device is provided in the pilothouse overhead console.
Propsmith – All new Fleming’s are equipped with a Propsmith tool which can be used for simple, trouble-free installation and removal of the propellors. The PropSmith is both a prop puller and a prop pusher, with no risk of damage to the prop.

Cruisaire reverse cycle air-conditioning throughout using REU model quiet blowers and Qht controls
Trudesign composite seacocks on all through hulls at or below waterline
Groco seacocks for main engine seawater inlets
Sika-Flex deck Caulking
5/8” thick teak deck
Pre wiring with coax, CAT 5 and speaker cables throughout – two of each cable run from every cabin to TV cabinet and from P/H to TV Cabinet, and from F/B to TV cabinet (4 coax)

Shipyard Optional Extras

1. Fleming 60 crew cabin fitout which includes Boat Deck Extension
2. Reverso 24v DC Fuel Polishing System
3. CE or UKCA Approval
4. Upgrade Std Genset 13.5Kw 50Hz to 17.5Kw 50Hz
5. Twin disc EJS/EPS system, stabilisers, dual windlass, bow and stern thruster
6. Li-ion House battery system (800 A/H) 24V 2 x 4000w Inverters/ 3 x 100A Chargers
7. Auto-Anchor Chain Counter in Pilothouse & Flybridge (AA150)
8. Opacmare stainless steel passerelle 
9. 50ft long, 230v, 32 amp Shore power Cord (50Hz boats only) 10 AWG 3-core
10. Install Owner supplied Transducers (3)
11. CCTV System 4 Pan/Tilt/Zoom Cameras (E/R, Cockpit, F/B) Control by Boning System
12. Docking Cameras (fwd/aft) installed Port & Stbd. connected to Boning System
13. iPad integration for Boning System (use e-Fit supplied iPad)
14. Install"T" & Drain Fittings for Winterizing Exterior Fresh Water Outlets
15. Prep for diesel heat - Incl. Ducting, teak vents, Provision off fuel tank, Provision for Electrics
16. "Smart" Spray Rails
17. Increase length of std Chain from 300ft to 400ft
18. Secondary 100lbs (45Kg) S/S Ultra Anchor with Ultra Chain Swivel
19. 98ft (30m) of 7/16" Chain Spliced to 328ft (100m) Yale Nylon Braid Rope

20. Teak to Forward Deck (beige non-skid is standard)
21. Anchor Platform Stainless Steel Dirty Water Catchment Fence
22. Cockpit Console, Stbd. Side with Lid, Sink, Fridge, Engine/Thruster Control & Start/Stop Buttons
23. Port Side Cockpit Cabinet with Storage, Wet Locker & Moulded Stairs to F/B
24. 32amp (50Hz) Cablemaster Reel installed Stbd. Side (CRM-30)
25. Two Stainless Steel Removable Rails on Swim Step
26. Fold-up Cleats on Swim Step x 2
27. Reinforce Transom (Port Side) for Passerelle
28. 1/2" Thick Acrylic side deck wing doors, s/s frame & hardware with etched "F" Logo
29. Cushion forward of Starboard Settee on Flybridge
30. Kenyon Electric BBQ Grill on Cabinet Aft of Port Flybridge Seating
31. Isotherm Refer in Cabinet Aft of Port Flybridge Seating
32. Hard Top with opening Skylights and LED Lighting
33. Two Aft Facing Flood Lights Located at Aft End of Boat Deck
34. Teak on Swim step
35. Accom Layout B- Full Beam Master Cabin & P/H with Day Head
36. Remove Washer & Drier to increase space in port cabin to include new wardrobe and draws
37. Instal Combination Washer/Drier within master cabin wardrobe access from companion way
38. Fit Laundry bin - pull out type beside combination Washer/Drier
39. Modify wheelhouse seating with Hi-Lo table and infill cushions to create larger bunk
40. Pilothouse Privacy Door with Flat Teak Panel
41. Do Not Drill Holes for Intercom Cables but Indicate Location
42. Granite Finish in Guest Head (including Countertop and Shower Stall)
43. Granite Finish in Master Head (including Countertop and Shower Stall)
44. Double Glazing - Salon & Pilothouse Windows (inc. Sliding Door)
45. Heated Towel Rails in Both Heads
46. Forward Cabin V Berth Layout with additional fixed Upper Bunks & Teak Slats on Hull Sides
47. Fwd. cabin two opening portlights with flyscreens
48. AC Outlet inside P/H Console behind Aircon Return Grill
49. Install Circuit Breaker & run 24V DC Power Cables to Helm Seat Pedestal
50. Oceanair blinds on fwd. facing windows & two side windows, specify colour
51. NEFF Stainless Steel Combination oven with Space under to be draw
52. Omit Microwave Oven and in Lieu make cupboard with internal shelve
53. Miele slimline 18" dishwasher with teak front panel
54. Granite finish on Galley Countertop
55. Settee on Stbd. side in lieu of Cabinets
56. Teak overhead handrail in salon
57. L-shaped Bar aft of salon settee with Bottle/Glass Rack & Wine cooler with three high level cupboards
with glass panels as per 58-019 (No Sink)
58. Teak Grate in Port seating for Sub-Woofer
59. Powered Hi/Lo Teak Table with Foldout Leaves & Remote Control

60. Humphree 24v DC at rest in lieu of ABT
61. Saloon seating 90-degree corner in lieu of 45 degrees
63. STIDD wheelhouse helm seat to have Bonning left arm and GRID right arm
64. STIDD Flybridge helm seat to have GRID right arm - wireless
65. Instahot - instant hot and cold filtered water dispenser
66. Fit sink to outboard side of aft seat unit at Flybridge next to BBQ
67. Move Wine cooler to unit next to Fridge/Freezer stbd side
68. Engine Room Aircon 16,000 BTU if no second genset
69. Fwd Cabin Queen berth with v Bunks above
70. Fit owner supplied reading lights with USB chargers to Fwd cabin Queen berth both sides
and forward end of bunks, port cabin bunks, Master cabin berth both sides and crew cabin - Total of 9
71. Fit NEFF Combination oven C28MT27HOB (or equivalent model) in place of microwave
72. Fit scanstrutt power chargers to wheelhouse x two locations as per Dwg.
73. Stainless Steel Galley Sink (Black is standard)
74. Upgrade primary anchor from 45kgs to 60kgs
75. Prep for diesel heat - Incl. Ducting, teak vents, Provision off fuel tank & electrics
76. Cockpit Cabinet stbd side - Add round sink
77. Two Stainless steel removable rails on swim platform
78. LED Underwater Lights - SeaVision SV19 (2) on Transom (DC Power)
79. Illuminated Name Board - with boat name in S/S letters (port & Starboard)
80. Teak on Flybridge
81. Bullnose finish on Galley Worktop
82. Galley window to be opening
83. Prep for watermaker. With 1" Seacock & Strainer. 220v AC Power Cable & Circuit Breaker
84. Interior 220v Sockets (Vimar) to have USB A
85. Fit 220v Socket high level within Master cabin wardrobe aft of door
86. Master Cabin - Both Hanging Lockers aft (port & starboard) to have shelve halfway
87. Master Cabin - Headboard to be full height (six panel design) at Bed width
88. Master Cabin - Main wardrobe to have half-length hanging rail (outboard)
with clothing shelves aft to full height of wardrobe and shelve on top of washer/drier
89. Master Cabin - Main wardrobe to have next to washer/drier pull out laundry bin to depth to
work within space permitted whilst allowing access to wardrobe
90. Galley - High level slide cupboards to have hinged doors with round push catches btm corners
91. Galley - Aft to have two wide draws & wide lower draws with round push catches at centres
92. Galley - cupboard above Oven to have shelve halfway stopping 150mm from front
and round push catches at btm corners
93. Galley - Slide out bin draw to have round push catch at top centre
94. Galley - Swing out corner cupboard to have round push catch at top corner
95. Galley - Cupboard doors under sink to have round push catches at top corners
96. Galley - Fridge Freezer to have ice making feature as per 58-036

97. Saloon TV cabinet and adjacent cupboard to have round push catches at top corners
98. Saloon - Aft bar unit to have round push catches on draws and cupboard door
99. Saloon - Aft bar high level glass cupboard to have round push catches at half height
100. All draws in saloon and galley to be pull out type on guid tracks not traditional lift up type
101. Saloon Seating Stbd. side to have 90-degree corner
102. Wheelhouse seating port side to have 90-degree corner
103. Draw drinks Fridge to Cockpit and Flybridge in lieu of standard door Fridge
104. 2 x Round teak stools with storage inside
105. Port side cabin main wardrobe to have two shelves inside
106. Forward Cabin - Starboard wardrobe to have full shelves
107. Galley - Move NEFF Combi oven to below counter and re-instate cupboard
with shelve above as per sketch
108. Crew wardrobe to have shelves fitted
109. Fiddle rail in guest shower compartment to be fitted
110. Teak lid for flybridge sink
111. FRP Fleming White Cap rails in Lieu of Teak

FYE Disclaimer

Fleming Yachts Europe Ltd normally only acts as a broker for the Vendor who, unless otherwise stated, is not selling in the course of a business. Whilst every care has been taken in the preparation of these particulars the correctness is in no way guaranteed and they are intended as a guide only and do not constitute a part of any contract. A prospective buyer is strongly advised to check these particulars and where appropriate, and at his own expense, to employ a qualified marine surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.

Disclaimer